Handle Contradictions - Oce 2090 User Manual

Handle contradictions

Introduction
Task for operators, key operators
Three types of contradictions can occur on the Océ VarioPrint 2090 .
Specification contradictions
Specification contradictions refer to combinations of settings that are not
possible combinations.
For example, you cannot make a 2-sided scan from the glass plate. Change
the original setting from 2-sided to 1-sided.
Start contradictions
Start contradictions refer to errors that occur when the required resources
for a job are not available. Start contradictions only appear after you press
the Start key
For example, a job needs staples, but the staplers are empty. An alarm bell
is displayed. This alarm bell indicates that a certain supply is not available,
for example staples or toner.
Run-time contradictions
Run-time contradictions occur when the system has not enough supplies,
for example paper, while the system prints a job. The active or current job
stops. The operator panel displays a message.
162 Océ VarioPrint 2090 User manual
.