Stop The Scanning Of A Scan Job - Oce 2090 User Manual

Stop the scanning of a scan job

Introduction
Task for operators
When you make a copy, the Océ VarioPrint 2090 first scans the documents that
are in the automatic document feeder or on the glass plate. The documents in
the automatic document feeder are separated first and then scanned.
You can stop the scanning process with the Correction key
panel. If you press the Correction key, the scanner first scans the originals that
were separated in the automatic document feeder and then stops.
The screen displays the message 'Cancel this job?' with two options.
'Yes'
'No'
Illustration
[53] Stop scanning
[53] Stop scanning
How to stop scanning
Press the Correction key
1
originals.
146 Océ VarioPrint 2090 User manual
on the operator panel while the scanner scans the
on the operator