Pad Group - Akai MPC TOUCH User Manual

Pad Group

The pad group feature extends the concept of pad mutes: you can mute or unmute multiple pads (on a
single track) by pressing one pad that you have assigned to a mute group. This is useful if you want to
hear a track without a particular group of sounds or if you want to isolate specific sounds in various
combinations. You can create up to 16 different pad groups.
To use pad groups:
1. If the Pad Group tab in the lower-left corner is not already selected, tap it.
2. Select the desired pad bank. Use the Pad Bank Buttons or tap a pad bank shown on the left side of
the touchscreen.
3. To select a pad to add to a mute group, press it or tap it on the touchscreen. The selected pad is lit
green. If there are other pads in the same mute group, they will flash yellow.
4. Tap the number of the desired mute group. To remove it from a mute group, tap Off.
Pad Group.
187