Akai MPC TOUCH User Manual page 204

Use the Slice field to select what part(s) of the sample will play:
•
All: The entire sample will play.
•
Pad: The sample will play from the Pad Start position to the Pad End position, described below.
This also lets you activate
•
Slice 1, 2, 3, etc.: If you have sliced the sample in Chop Mode, you can select which slice will play
when you trigger the pad.
Use the Direction selector to select in which direction the sample will play:
•
Fwd: The sample will play in the normal forward direction.
•
Rev: The sample will play in reverse.
Use the Offset slider to determine a time offset for the sample's playback.
•
Positive values (right of center): When the pad is played, playback will start immediately but at a
later point in the sample specified by the offset value.
•
Negative values (left of center): When the pad is played, playback will be delayed by the amount
specified by the offset value.
Pad Loop.
204