Akai MPC TOUCH User Manual page 223

•
Pad Start: Click and drag this field up or down to
determine the position (in samples) where the pad's
playback will start. Alternatively, double-click the
field and type in a number. The minimum value is 0,
and the maximum value is the Pad End value.
•
Pad End: Click and drag this field up or down to
determine the position (in samples) where the pad's
playback will stop. Alternatively, double-click the
field and type in a number. The minimum value is the
Pad Start value, and the maximum value is the
sample's total length (in samples).
•
Pad Loop: Click this box to activate or deactivate
Pad Loop. When activated, you can hold down the
pad to cause that sample to repeat from the Loop
Position (Loop Pos) to the end of the sample.
Release the pad to stop the repeating playback.
Important: For Pad Loop to work, you must set
Sample Play (in the Key Group section) to Note On
instead of One Shot.
•
Loop Pos (position): Click and drag this field up or
down to determine the position (in samples) where
the pad's playback will repeat when Pad Loop is
activated. Alternatively, double-click the field and
type in a number.
223