Akai MPC TOUCH User Manual page 96

The Sequence section shows the current sequence and its information.
Use Sequence field to select a sequence.
To edit the name of the sequence, tap the cursor icon on the right edge of the section, and use the
virtual keyboard that appears.
Use the BPM field to adjust the tempo of the sequence.
To set whether the sequence follows its own tempo or a master
tempo, tap the Sequence/Master button under the BPM field.
Alternatively, press and hold Shift+Tap Tempo.
Use the Bars field to adjust the length of the sequence in bars.
The Loop button shows whether the sequence (or a part of it) will loop or not.
To enable or disable looping, tap the button.
To set the start point and end point of loop, tap the First or Last field (respectively) and then use the
Data Dial or the –/+ buttons, or double-tap the field and use the numeric keyboard that appears. (Keep
in mind that the Last Bar value depends on the total length of the sequence.)
Use the Transpose field to set the transposition (in semitones) of the entire sequence.
96