Akai MPC TOUCH User Manual page 176

Fade Out
This process sets a fade-out between the start point and end
point. The following types are available:
•
Linear fades the audio out with a linear curve—a straight line
between the start and end.
•
Log fades the audio out with a logarithmic curve—quickly
rising at the start and flattening out towards the end.
•
Exp fades the audio out with an exponential curve—slowly
rising in the beginning and growing steeper towards the end.
Pitch Shift
This process changes the pitch of the sample without changing its
length. This lets you set the sample's pitch to your sequence
without affecting the sample's tempo or duration. You can adjust it
up to 12 semitones, up or down. Keep in mind that the audio
quality may decrease at more extreme settings.
Gain Change
This process raises or lowers the volume of the sample. You can
adjust it up to 18 dB, higher or lower. This function is different than
Normalize because it will allow volumes beyond clipping level. This
may be a desired effect, but remember to watch your output level!
176