Akai MPC TOUCH User Manual page 131

The Track field shows the name of the current track.
Use the Track Length field to set how long the track is. If you select the minimum value, Sequence or
0, the track will be however long your sequence it.
Tip: This feature lets you maintain tracks of different lengths. For instance, you could play a 1-bar drum
sequence repeatedly under a 4-bar bass line.
Use the Bars field to adjust the length of the sequence in bars.
Use the BPM field to adjust the tempo of the sequence.
To set whether the sequence follows its own tempo or a master tempo, tap the
Seq/Mst button next to the BPM field. Alternatively, press and hold Shift+Tap Tempo.
The counter indicates the current playhead position.
To adjust the position, tap it, and then use the use the Data Dial or the –/+ buttons.
To switch the time increments, double-tap it. You can view it in Bars, Beats, and
Ticks or in hours (HH), minutes (MM), seconds (SS), and frames (FF).
131