Akai MPC TOUCH User Manual page 259

When the Samples tab is selected, you can do any of the following:
•
To move through the Sample Pool, swipe up or down.
•
To preview a selected sound in the Sample Pool, tap Play ( ) at the bottom of the touchscreen.
•
To select another program, double-tap the Program field at the top of the touchscreen. In the list
that appears, tap the desired program. Alternatively, tap the Program field and then use the Data
Dial or the –/+ buttons to select a location.
•
To enable or disable the audition function, tap Audition at the bottom of the touchscreen. In the
window that appears, tap Auto to enable or disable it. To adjust the level, tap and drag the Level
slider up or down. Tap Audition once more to hide the window.
Important: Only audio samples can be previewed. Also, make sure that your audio hardware is
connected properly to listen to the audio file.
•
To assign a sample to a pad, tap it (or press it) so it lights green. Then, in the Sample Pool list,
double-tap the desired sample. Alternatively, use the Data Dial or –/+ buttons to assign a sample
to and/or change the assigned sample on the selected pad.
•
To clear a sample from a pad, tap it (or press it) so it lights green, and then press the Data Dial.
The Samples tab in the Browser.
259