Track Mixer
The track mixer shows levels, panning,
and mute states for all used tracks.
To view a specific setting on all tracks,
tap the Level, Pan, or Mute button on
the bottom edge of the touchscreen.
When a track is selected, you can view and adjust all of its settings in the left side of the touchscreen
rather than using the tab buttons at the bottom edge.
When viewing the track channel strip:
•
The first field shows the current track, which you can change.
•
The second field shows the current program the track is using, which you can change (to a program
of the same type).
•
To solo or mute the pad, tap Solo or Mute (respectively).
•
To change the panning of velocity of the track, adjust the pan knob or Velocity slider.
Note: If the track is using a plugin program, then the slider will send CC #7 (Volume) and the knob will send
CC #10 (Pan) to your instrument plugin. The plugin will then handle these messages as it normally would.
247