When viewing the track channel strip:
•
The first field shows the current track number, which you can
change, and its name.
•
The second field shows the name of the program the track is
using.
•
To solo or mute the track, tap Solo or Mute (respectively).
•
To change the panning of velocity of the track, adjust the pan
knob or Velocity slider.
Note: If the track is using a plugin program, then the slider will
send CC #7 (Volume) and the knob will send CC #10 (Pan) to your
instrument plugin. The plugin will then handle these messages as it
normally would.
When viewing the master strip:
•
The first field shows the current master output as a stereo pair,
which you can change.
•
The Inserts field shows any enabled or disabled effects for that
master output. Tap the pencil icon to open a window where you
can change and enable or disable the effects.
•
To mute the master output, tap Mute.
•
To change the panning or level of the master output, adjust the
pan knob or Level slider.
95