Akai MPC TOUCH User Manual page 161

If you set the Convert To field to Assign the slice to a pad,
the pad will simply refer to the slice in this sample instead of
creating a new sample. This is useful for reducing clutter in
your project.
Important: Assigning a sample to a pad in this way will
replace the sample on the first layer of the pad.
Use the Pad field to select the desired pad. Alternatively,
press the desired pad.
Use the Slice Type field to select how the pad's layer settings
will be set when the slice is assigned to it (see
Mode to learn more about the parameters mentioned below):
•
Non-Destructive Slice: The pad's Slice setting will be
set to the slice number.
•
Pad Parameters: The pad's Slice setting will be set to
Pad. The Pad Start and Pad End will be set to the slice's
start point and end point values, and the Loop Position
will be set to the slice's start point but with Pad Loop
deactivated.
Use the Program field to specify the program to which you
want to add the slice.
To convert the sample, tap Do It.
To cancel the operation, tap Close.
Program Edit
161