Mute; Send Effects - Akai MPC TOUCH User Manual

Mute

When the Mute tab is selected, mute the
currently selected pad by doing any of the
following:
•
Turn the Data Dial.
•
Use the –/+ buttons.
•
Tap the pad in the touchscreen.
When a pad is muted, its M button will light red.

Send Effects

When the Send tab is selected, use the Data
Dial or –/+ buttons to adjust the send level of
the currently selected pad.
The level sliders in each pad show a visual
representation of the level. Double-tap a pad
in the touchscreen to open a large version of
the level slider.
You can select up to four send effects for
each pad. You can use various effects
included in your MPC software as well as
other VST and AU plugins installed on your
computer. Tap the Send button to cycle
through the four available slots for each.
To learn how to use send effects, please see
Important: To use a send effect, you have to load an effect into the corresponding send effect slot in the
Channel Mixer.
General Features > Effects > Send/Return Effects.
192