Track Group
The track group feature extends the concept of track mutes: you can mute or unmute multiple tracks (in
a single sequence) by pressing one pad that you have assigned to a track group. This is useful if you
want to hear a track without a particular group of sounds or if you want to isolate specific sounds in
various combinations. You can create up to 16 different track groups.
To use track groups:
1. If the Pad Group tab in the lower-left corner is not already selected, tap it.
2. Select the desired pad bank. Use the Pad Bank Buttons or tap a pad bank shown on the left side of
the touchscreen.
3. To select a track to add to a mute group, press the corresponding pad or tap it on the touchscreen.
The pad for the selected track is lit green. If there are other pads for tracks in the same mute group,
they will flash yellow.
4. Tap the number of the desired mute group. To remove it from a mute group, tap Off.
Track Group.
242