Setting Parameters In The Standard Setting Mode - Toshiba TOSVERT VF-PS1 Instruction Manual

4.1.2 Setting parameters in the standard setting mode

Press the key to place the inverter in this mode.
MODE
Standard monitor mode
Enter key
Used to set values
and return to
previous menu
 How to set extended parameters
Each extended parameter is composed of an "" and three figures that follow the f, so first select and read out the
heading of the parameter you want "" ~ "." ("":Parameter bearing a number between 100 and
199, "":Parameter bearing a number between 900 and 999)
(1) Select the title of the parameter you want to change. (Press the
(2) Press the Enter key to activate the selected parameter. (Press the
(3) Selects parameter to be changed. (Press the
(4) Reads the programmed parameter setting. (Press the
(5) Change the parameter value. (Press the
(6) Press this key to save the change. (Press the
 How to set basic parameters
(1) Selects parameter to be changed.
(Press the
(2) Reads the programmed parameter setting.
(Press the
(3) Change the parameter value.
(Press the
(4) Press this key to save the change. (Press the
Select key Mode key
Used to select Used to select mode
item and operation level
or key.)
key.)
ENT
or key.)
key.)
ENT
D-3
or key.)
key.)
ENT
or key.)
*
* Parameter title and the
setting value are displayed
Alternately.
or key.)
key.)
ENT
E6581386
key.)
ENT
4
*