Preset Speed Operation Frequencies; Preset Speed Operation Frequency 8 To; Forced Oeration Control - Toshiba TOSVERT VF-PS1 Instruction Manual

[Parameter setting]
Title






If the upper limit frequency (  ) is within jump frequency range,
it is limited to the lowest frequency in the jump frequency range.
If the lower limit frequency (  ) is within jump frequency range,
it is limited to the highest frequency in the jump frequency range.
Do not overlap upper limit frequency (  ) and lower limit frequency (  )
within jump frequency range.
If they are overlapped, it is operated lowest jump frequency.
Do not overlap two or more jump frequency ranges, or
it cannot be operated within normal range.
During acceleration or deceleration,
the jumping function is disabled for the operation frequency.
6.13

Preset speed operation frequencies

6

6.13.1 Preset speed operation frequency 8 to 15

 ~  : Preset speed operation frequencies 8 to 15
 For details, refer to Section 5.12.
6.13.2 Forced operation control
 : Preset speed operation frequency 15 (Forced operation frequency)
 For details, refer to Section 6.27.
Function
Jump frequency 1
Jumping width 1
Jump frequency 2
Jumping width 2
Jump frequency 3
Jumping width 3
Adjustment range
 ~  Hz 
 ~  Hz 
 ~  Hz 
 ~  Hz 
 ~  Hz 
 ~  Hz 
Jumping width 2
F-22
E6581386
Default setting








Jumping width 1