Toshiba TOSVERT VF-PS1 Instruction Manual page 11

6.22.4 Max output voltage modulation rate ······································································································
6.23 Fine adjustment of frequency setting signal ·································································································
6.24 Operating a synchronous motor···················································································································
6.25 Acceleration/deceleration 2··························································································································
6.25.1 Setting acceleration/deceleration patterns and switching acceleration/deceleration patterns 1 and 2 ··
6.26 Protection functions······································································································································
6.26.1 Setting of stall prevention level ·············································································································
6.26.2 Inverter trip record retention··················································································································
6.26.3 Emergency stop ····································································································································
6.26.4 Output phase failure detection ··············································································································
6.26.5 OL reduction starting frequency ············································································································
6.26.6 Input phase failure detections ···············································································································
6.26.7 Control mode for low current·················································································································
6.26.8 Detection of output short circuit ············································································································
6.26.9 Overtorque trip ······································································································································
6.26.10 Cooling fan control selection·················································································································
6.26.11 Cumulative operation time alarm setting·······························································································
6.26.12 Abnormal speed detection ····················································································································
6.26.13 Overvoltage limit operation ···················································································································
6.26.14 Undervoltage trip···································································································································
6.26.15 Regenerative power ride-through control level ·····················································································
6.26.16 VI/II analog input wire breakage detection level····················································································
6.26.17 Guide to time of replacement················································································································
6.26.18 Rush current suppression relay activation time ····················································································
6.26.19 Motor thermal protection ·······················································································································
6.26.20 Braking resistance overload curve ········································································································
6.26.21 Selection of a restart condition for the motor stopped with a mechanical brake ···································
6.26.22 Motor PTC thermal protection···············································································································
6.26.23 Protection against a failure of the control power backup device (optional CPS002Z)···························
6.27 Forced fire-speed control function················································································································
6.28 Low torque detection signals························································································································
6.29 Override ·······················································································································································
6.30 Adjustment parameters ································································································································
6.30.1 Pulse train output for meters·················································································································
6.30.2 Setting of optional meter outputs ··········································································································
6.30.3 Calibration of analog outputs ················································································································
6.31 Operation panel parameter ··························································································································
6.31.1 Prohibition of key operations and parameter settings ···········································································
6.31.2 Displaying the rotational speed of the motor or the line speed ·····························································
6.31.3 Changing the steps in which the value displayed changes ···································································
6.31.4 Changing the standard monitor display·································································································
6.31.5 Selection of operation panel stop pattern······························································································
6.32 Tracing functions··········································································································································
6.33 Integrating wattmeter ···································································································································
6.34 Communication function·······························································································································
6.34.1 2-wire RS485/4-wire RS485 ·················································································································
6.34.2 Open network option·····························································································································
6.35 My function···················································································································································
6.36 Instruction manuals for optionally available devices and special functions ··················································
7. Operation with external signal ·····························································································································
7.1 External operation ········································································································································
7.2 Applied operation with input and output signals (operation by terminal board) ············································
7.2.1 Functions of input terminals (in case of sink logic)················································································
7.2.2 Functions of output terminals (incase of sink logic) ··············································································
7.2.3 Analog input filter ··································································································································
7.3 Setup of external speed command (analog signal) ······················································································
7.3.1 Setup by analog input signals (RR/S4 terminal) ···················································································
iii
E6581386
F-42
F-42
F-43
F-43
F-43
F-47
F-47
F-47
F-48
F-49
F-50
F-50
F-50
F-51
F-51
F-52
F-52
F-53
F-53
F-53
F-54
F-54
F-55
F-55
F-55
F-55
F-56
F-57
F-57
F-59
F-60
F-61
F-63
F-63
F-64
F-64
F-65
F-65
F-66
F-67
F-68
F-68
F-68
F-71
F-72
F-72
F-78
F-79
F-79
G-1
G-1
G-2
G-2
G-5
G-9
G-10
G-11