Toshiba TOSVERT VF-PS1 Instruction Manual page 97

[Terminal FM-related parameters]
Title Function
FM terminal meter

selection
FM terminal meter

adjustment
Constant at the

time of filtering *4
FM voltage/current

output switching
FM output gradient

characteristic
 FM bias adjustment
 FM output filter
*1: Monitor adjustment level selected.
*2: "Compensated frequency" refers to the frequency actually sent from an inverter to the motor connected.
*3: Default setting value is adjusted for connection of frequency meters "QS60T".
(Between FM and CCA: Approx. 3.6V)
*4: The output current, input voltage, output voltage, compensated frequency, speed feedback (real-time value) torque, torque
current and exciting current output (FM/AM/pulse and monitor output) can be filtered.
Adjustment range
 :  Output frequency
 :  Frequency command value
 :  Output current
 :  Input voltage (DC detection)
 :  Output voltage
 :  Compensated frequency *2
 :  Speed feedback (real-time value)
 :  Speed feedback (1 second filter)
 :  Torque
 : Torque command
   :  Torque current
   :  Exiting current
   :  PID feedback value
   :  Motor overload factor (OL2 data)
   :  Inverter overload factor (OL1 data)
 :  Regenerative braking resistance overload factor (OLr data)
 :  Regenerative braking resistor load factor (% ED)
   :  Input power
   :  Output power
   :  Optional AI2 input
   :  RR/S4 input
   :  VI/II input
   :  RX input
   :  Optional AI1 input
   :  FM output (Do not select this option.)
   :  AM output
   :  Fixed output 1
   :  Communication data output
   :  Fixed output 2
 : Fixed output 3
 : Cumulative input power
 : Cumulative output power
 : Gain display
 ~  : My function monitor 1~4
 : Signed output frequency
 : Signed frequency command value
 : Signed compensated frequency
 : Signed speed feedback (real-time value)
 : Signed speed feedback (1 second filter)
 : Signed torque
 : Signed torque command
 : Signed torque current
 : Signed PID feedback value
 : Signed RX input
 : Signed optional AI1 input
 ~  : Signed fixed output 1~3
 ~  : Function none
 : MON1 (Expansion I/O card2 option)
 : MON2 (Expansion I/O card2 option)
 : RP (Expansion I/O card2 option)
–
 msec,  msec~  msec 
 : Voltage output (0~10V),  : Current output (0~20mA)
 : Negative gradient (downward-sloping),
 : Positive gradient (upward-sloping)
–  ~  %
 : No filter,  : Filter approx. 10ms
 : Filter approx. 15ms,  : Filter approx. 30ms
 : Filter approx. 60ms,  : Filter approx. 120ms
 : Filter approx. 250ms,  : Filter approx. 500ms
 : Filter approx. 1s
E-27
E6581386
Adjustment
Default setting
level
(a)
(a)
(b)
(c)
(c)
(a)
(a)
(a)
(d)
(d)
(b)
(b)
(a)
(a)
(a)
(a)
(a)
(b)
(b)
(a)
(a)
(a)
(a)
(a)
(a)

(a)
–
–
–
–
(a)
(a)
–
*1
(a)
(a)
(a)
(a)
(a)
(d)
(d)
(b)
(a)
(a)
(a)
–
–
(a)
(a)
(a)
*3





5