1. Preparing The Machine; Step 1: Check That The Liquid Material Vat Is Not Dirty - Roland DWP-80S User Manual

1. Preparing the Machine

WARNING
WARNING
WARNING
WARNING
WARNING
CAUTION
CAUTION
CAUTION
Step 1: Check that the Liquid Material Vat is Not Dirty
Before starting printing, check that there is no dirt or foreign matter in the liquid material vat (such as fragments
remaining from the last printing operation).
If dirt or foreign matter is present, wash the liquid material vat.
" P. 39 "2. Wash the liquid material vat."
16
Chapter 2 Output
Be sure to perform operations as specified by the instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury or burns.
Do not store photo-curable resin in any of the following locations:
• Any location exposed to open flame
• Any location where high temperature may occur
• Near bleach or any other such oxidizing agent or explosive material
• Any location within the reach of children
Doing so may result in fire. Accidental ingestion by children may pose a health
hazard.
Never place a photo-curable resin container in fire.
Resin may flow out, catch fire, and spread fire to other nearby objects.
Keep open flame away from the work area.
Photo-curable resin may ignite.
Never drink or sniff photo-curable resin or allow it to come in contact with the
eyes or skin.
Doing so may be hazardous to your health.
When handling resin, wear rubber gloves and protective eyewear.
Do not allow resin to come into contact with the skin or eyes.
Always close the lid securely when storing a photo-curable resin in a container.
Failure to do so may result in leakage of the photo-curable resin. The remaining
resin may also deteriorate or cure, making it impossible to use.
Keep your hands and body away from the moving portions of the machine
during operation.
Hands and other body parts can become caught in the machine, resulting in
injury.