Step 4: Post-Print Processing - Roland DWP-80S User Manual

Step 4: Post-print Processing
CAUTION
Was h i n g co n ta in er clas sifi catio n s
This machine comes with two different containers for cleaning the job. Use one as a container for "rough"
cleaning, and use the other for "finishing" cleaning.
1.
Give the job a rough washing.
A
Put the removed job in the rough washing container.
B
Put ethanol in the rough washing container.
Insert ethanol until the job is entirely submerged.
Ethanol
(Commercially available)
Job
Washing container (for rough washing)
M E M O
Use ethanol with a concentration of at least 96%.
I m p o r t a n t
Be careful of fire when using ethanol.
C
Put water into the ultrasonic cleaner container and partially submerge the rough washing
container in the water.
M E M O
• For information on how to use the ultrasonic cleaner, refer to the instruction manual included with the cleaner.
• Use an ultrasonic cleaner that produces a frequency of 40 to 45 kHz.
• If the ethanol in the washing container changes color, replace it and wash the job again.
• Contact your authorized Roland DG Corp. dealer or visit the Roland DG Corp. website (http://www.rolanddg.
com/) to purchase an ultrasonic cleaner.
When handling resin and ethanol, wear rubber gloves and protective eyewear.
Do not allow resin or ethanol to come into contact with the skin or eyes.
Tweezers
3. Printing
Chapter 2 Output
33