Maintenance After Use - Roland DWP-80S User Manual

3. Printing

Maintenance after Use

After use, be sure to clean the liquid material vat, the printing platform, and the work tray.
WARNING
WARNING
WARNING
WARNING
CAUTION
I m p o rt an t
• After printing completes, do not allow resin to remain in the liquid material vat. Also remove any adhering
resin. Allowing the resin to remain in the liquid material vat can cause the vat to deteriorate and can lead to
printing failure.
• Be sure to remove all the resin that has adhered to the printing platform. Allowing the resin to remain can
cause the printing platform to deteriorate and printing to fail.
• Also be sure to remove all the resin that has adhered to the work tray. Allowing the resin to remain can cause
the work tray to deteriorate to the point where it can no longer be used.
• When using ethanol for maintenance, only use it where instructed. Failure to do so may result in color
changes or deformation.
• Be careful of fire when using ethanol.
• Dispose of used ethanol according to local waste sorting criteria. (Do not dispose of resin in sewage systems
or rivers.)
1.
Wash the printing platform.
A
Open the front cover.
B
Loosen the printing platform retaining screw.
Loosen the retaining screw until the printing platform drops slightly.
36
Chapter 2 Output
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Be sure to perform operations as specified by the instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury or burns.
Never place a photo-curable resin container in fire.
Resin may flow out, catch fire, and spread fire to other nearby objects.
Never use gasoline, thinner, or any other flammable material.
Doing so may result in fire.
When handling resin, wear rubber gloves and protective eyewear.
Do not allow resin to come into contact with the skin or eyes.