Roland DWP-80S User Manual page 71

Windows 10
G
Right-click on the "Unspecified" DWP-80S driver for the machine being used, and
then click [Properties].
If the machine and the computer are not connected, no DWP-80S driver will be displayed under
"Unspecified." If no driver is displayed, turn on the machine and connect the machine to the
computer.
H
Click the [Hardware] tab, then double-click the name of the model being used.
I
Click [Change Settings] on the [General] tab to hide the [Change Settings] button.
If [Change Settings] is not displayed from the start, continue to the next step.
J
Click [Drivers], and then click [Delete].
K
In the "Confirm Device Uninstall" window, click [OK].
The DWP-80S driver for the model being used will still be displayed as "Unspecified" at this
point.
L
After uninstalling the driver per P.67 "Uninstalling the DWP-80S Driver", re-install
the DWP-80S driver.
When re-installing the DWP-80S driver, ensure that the driver is installed correctly by following
the procedure described on P.59 "Installing the DWP-80S Driver Separately"
Windows 8.1
C
Moving the mouse
pointer to the lower
right corner of the
desktop window will
move the view up
slightly.
The charms bar will be
displayed on the right
side of the screen.
D
Click [Settings].
The [Settings] charm will
appear on the right side
of the screen.
E
Click [Control Panel].
F
Click [Devices and
Printers].
Troubleshooting
Windows 7
Chapter 4 Appendix
71