Features Of This Machine - Roland monoFabARM-10 User Manual

Features of this Machine

Layered projection technology printing
The monoFab ARM-10 is a 3D printer that uses layered projection technology.
It employs photo-curable resin (referred to simply as
and a projector with a UV LED light source to print an object based on 3D data.
(p. 12)
""Operation Flow"
The advantages of using the layer exposure method to print objects one layer at a time
The printing method whereby print data is sliced into layers at regular intervals, each of which is exposed (irradiated with light) by a
projector one layer at a time, is referred to as the layer exposure method.
This printing method makes it possible to print multiple jobs simultaneously and to print complex shapes with undercuts.
""Print Multiple Objects Simultaneously"
monoFab Player AM - A dedicated output program that can be used to start printing immediately
monoFab Player AM is a dedicated program for outputting 3D data in STL format to the ARM-10.
monoFab Player AM can be downloaded from the following web page:
""Roland DG Start-up page"
"resin"
in this manual), a fluid that hardens (cures) when exposed to light (UV rays),
(p. 17)
(http://startup.rolanddg.com/)
4