Table of Contents
Advertisement
Features of this Machine
Layered Projection Technology Printing
The monoFab ARM-10 is a 3D printer that uses
It employs photo-curable resin (referred to simply as
and a projector with a UV LED light source to print an object based on 3D data.
""Operation Flow"
(p. 15)
The Advantages of Using the Layer Exposure Method to Print Objects One Layer at a Time
The printing method whereby print data is sliced into layers at regular intervals, each of which is exposed (irradiated with light) by a projector one
layer at a time, is referred to as the
This printing method makes it possible to print multiple jobs simultaneously and to print complex shapes with undercuts.
""Print Multiple Objects Simultaneously"
monoFab Player AM - A Dedicated Output Program That Can Be Used to Start Printing Immediately
"monoFab Player AM,"
We have prepared
monoFab Player AM can be downloaded from the following web page:
""Roland DG Start-up page"
NOTE
This document corresponds to
instructed in this document. See the following section for the procedure to follow in order to check the version.
""I want to Check the
"monoFab Player
"layered projection technology."
"resin"
in this manual), a fluid that hardens (cures) when exposed to light (UV rays),
"layer exposure method."
(p. 38)
which is dedicated software for outputting 3D data in STL format.
(http://startup.rolanddg.com/)
"monoFab Player AM Ver.1.40"
or later. Older versions of the software have a different interface and cannot be operated as
AM" Version"
(p. 60)
5
Corresponds to
[monoFab Player AM Ver.1.40]
or later
Advertisement
Table of Contents
