Roland DWP-80S User Manual page 7

Inside the Front Cover
No. Name
Z-axis unit (inside red box)
Printing platform retaining screw
Z0 adjustment screw
Printing platform
Shutter lever
UV irradiation outlet (with shutter)
Liquid material vat stopper
Liquid material vat retaining screws
Liquid material vat
Liquid material vat holder
Explanation
The Z-axis unit moves the printing platform.
The printing platform retaining screw secures the
printing platform.
When setting the initial printing height (Z0), loosen the
Z0 adjustment screw.
The printing platform is where the job is created. The job
is printed while the printing platform is raised.
By installing the liquid material vat, the UV irradiation
outlet shutter on the bottom of the liquid material vat is
opened.
When the shutter opens, UV rays are emitted from the
machine.
The liquid material vat stopper secures the liquid
material vat in place. When the stopper is disengaged,
the liquid material vat moves forward.
The liquid material vat retaining screws secure the liquid
material vat holder.
The liquid material vat is the container to which resin for
modeling is added.
The liquid material vat holder is a frame for securing the
liquid material vat.
Chapter 1 Getting Started
Part Names
7