When.moving.the.machine; When Moving The Machine - Roland DWP-80S User Manual

When Moving the Machine

When moving the machine, secure the UV irradiation outlet shutter, and tape the front cover down.
Required items
Retainer (large): 1
Retainer (small): 2
I mp ort an t
Use the original retainers that were supplied when the product was delivered. If the original retainers are no
longer available, use an alternative that is capable of holding the UV irradiation outlet shutter in place. If the
retainers are not attached or the cover is not taped down, the machine may be damaged.
Procedure
A
Place the large retainer on top of the UV irradiation outlet shutter.
Fix the shutter in place so that it does not open. Insert the large retainer into the center of the recess in
the irradiation outlet. If you are not using the original retainers, use an alternative means to ensure that
the shutter does not open.
Retainer (large)
B
Place the two small retainers on either side of the large retainer, and gently fix the edge of
each small retainer in place with the liquid material vat stopper.
Loosen the liquid material vat retaining screws so that the edge of each small retainer is just held in place.
Retainer (small)
Shutter
Chapter 4 Appendix
73