Status Indicators - Agilent Technologies 1290 Infinity II User Manual

Status Indicators

1 The module status indicator indicates one of six possible module

Status indicators

1. Idle
2. Run mode
3. Not-ready. Waiting for a specific pre-run condition to be reached or
completed.
4. Error mode - interrupts the analysis and requires attention (for example a
leak or defective internal components).
5. Resident mode (blinking) - for example during update of main firmware.
6. Bootloader mode (fast blinking). Try to re-boot the module or try a
cold-start. Then try a firmware update.
1290 Infinity II Preparative Open-Bed Fraction Collector User Manual
conditions:
Using the Fraction Collector
Status Indicators
3
27