Table of Contents
Advertisement
industrial heat tracing solutions
The System|Misc window provides the following controls:
• units toggle Button - Select Fahrenheit for °F or Celsius for ºC as temperature units.
• screen saver timer entry Field -Select the number of minutes the display remains visible
with no user activity before moving into Window Saver mode. The Window Saver mode turns the
screen to black (no backlight) and no alarms will be visible.
If an alarm occurs, a red light on the front of the enclosure illuminates. The screen must be
touched to show the Circuit's alarm status.
imPortant: Using the screen saver enhances the lifetime of the window.
Range:
1–300 minutes
Default:
20 minutes
main menu timer entry Field
This entry sets the number of minutes before the display automatically reverts to the Main
Window. Pushing any button re-starts the timer.
imPortant: This time entry also determines how long a password entry will remain valid (see
System | Password section)
Range:
1–100 minutes
Default:
10 minutes
Language entry List
This entry specifies the language used on the NGC-UIT2 display windows.
Options:
Chinese, English, French, German, Russian, Spanish and others
Default:
English
mouse toggle Button
This entry allows the USB port on the NGC-UIT2 to function with a mouse installed. If enabled, a
mouse pointer will be visible on the UIT2 screen and will allow the user to navigate through the
screens.
Options:
OFF, ON
Default:
OFF
3.3.32 system | reLays WindoW
This window lets you set up alarm relays.
Fig. 3.42 System |Relays window
EN-RaychemNGC30UIT2Programming-AR-H58186 02/16
61 / 84
Hide quick links:
Advertisement
Table of Contents
