3.3.30 netWork | remoVe WindoW
This Level 2 password-protected window allows you to remove Device Addresses for
all types of modules from memory.
Fig. 3.40 Network |Remove window
The Network|Remove window provides the following controls:
• Device Address Entry Field - Enter the Device Address that requires removal from memory.
• Remove Action Button - Removes entered Device Address from memory.
3.3.31 system | misC WindoW
This window lets you create system-wide global parameters for all Circuits.
Fig. 3.41 System |Misc window
industrial heat tracing solutions
EN-RaychemNGC30UIT2Programming-AR-H58186 02/16
60 / 84