3.3.26 netWork | reLays WindoW
This status window lists all the available output devices and relay numbers, as well as the relays
that have already been setup.
Fig. 3.36 Network|Relays window
3.3.27 netWork | rtds WindoW
This window lists all the available RTD addresses. If an RTD has been assigned to a Circuit, the
right side of the window shows where the RTD has been used.
Fig. 3.37 Network |RTDs window
industrial heat tracing solutions
EN-RaychemNGC30UIT2Programming-AR-H58186 02/16
58 / 84