Status | Maint. Window; Events Window - Pentair raychem ngc-30/uit2 Programming Manual

industrial heat tracing solutions

3.3.22 status | maint. WindoW

This window displays the cumulative time in hours the heater has been On and the number of
cycles the EMR has turned on and off for the selected Circuit. Data displayed in the counter
windows is read only. Pressing the Reset buttons resets the appropriate counter.
Fig. 3.32 Status | Maint. window
The Status|Maint. window provides the following controls:
• heater time on Field - Total time the heater has been energized since it was last Reset.
• reset heater time action Button - Resets heater time to 0, and begins updating the field with
new values.
• relay Cycle Count Field - Total number of times the EMR has switched on since it was last Reset.
• reset relay Cycle Count action Button - Resets the Relay Cycle count to 0, and cycle counts
begin again.

3.3.23 eVents WindoW

The Events window displays a chronological history of all events and alarms. It retains the most
recent 2000 entries; after 2000 entries are recorded, the oldest entries are discarded as new
entries are added.
EN-RaychemNGC30UIT2Programming-AR-H58186 02/16 52 / 84