Main Status Window - Pentair raychem ngc-30/uit2 Programming Manual

industrial heat tracing solutions

3.3.2 main status WindoW

The main status window displays the status of all circuits that have been setup. For each circuit,
the main window displays:
Fig. 3.7 Main window with circuit status
Ckt# Circuit number
id Identification tag for the Circuit
°C or °F The control temperature
setPt Desired maintain temperature
dB Dead Band
amps Heater current amperes
G.F. Heater ground-fault current
status Relay (heater on, off or trip) and communication status
Color Coding of main Window
The data in the °F/°C, Amps, and G.F. columns are displayed in color to identify their current state.
Green When heater is energized (status On), within Normal range of setup
parameters
red In Alarm condition
orange (°F/°C only) - Temperature not within setpoint + dead band range
alarm relay status
Green No alarm
red In Alarm condition
imPortant: A Configuration Spreadsheet has been developed to assist in the collection of
specific circuit details. This spreadsheet is located in Appendix F.
EN-RaychemNGC30UIT2Programming-AR-H58186 02/16 29 / 84