Status | Rtds Window; Status | Pasc Window; Industrial Heat Tracing Solutions En-Raychemngc30Uit2Programming-Ar-H58186 02/16 2 - Pentair raychem ngc-30/uit2 Programming Manual

3.3.16 status | rtds WindoW

The Status|RTDs window lists the RTD devices and numbers assigned to the selected Circuit,
along with the last reported temperature from each RTD and the assigned RTD Mode.
Data in this status window cannot be changed.
Fig. 3.22 Status |RTDs window

3.3.17 status | PasC WindoW

The Status | PASC window displays the current status of Circuit switching PASC algorithm. Data
displayed in this status window cannot be changed.
Fig. 3.23 Status | PASC window
The Status|PASC window provides the following controls:
• on Count Field - The duration (in seconds) an EMR or SSR is on during one on/off cycle.
• off Count Field - The duration (in seconds) an EMR or SSR is off during one on/off cycle.
industrial heat tracing solutions EN-RaychemNGC30UIT2Programming-AR-H58186 02/16 46 / 84