Table of Contents
Advertisement
1.7 teChniCaL suPPort
1.8 naViGation
industrial heat tracing solutions
For technical support, contact your local representative, or contact Pentair Industrial Heat Tracing
Solutions directly:
Pentair Industrial Heat Tracing Solutions
7433 Harwin Drive
Houston, TX 77036
USA
Tel: 800-545-6258
Tel: 650-216-1526 (outside U.S.)
email: technicalsupport@pentairthermal.com
1.8.1 naViGatinG BetWeen WindoWs
The top row of the window contains the main menu buttons, and the bottom row contains subsets
of those main menu buttons.
When asked to navigate between windows in this manual, simply press a combination of a Main
Menu | Submenu buttons.
For example in Step 1, the System | Misc window must be accessed. To perform this action, press
the System button on the top row. On the bottom row, press the Misc button.
On Setup and Status windows, a Status legend displays. This information shows what Device
address and Relay address have been assigned to a particular Circuit.
Main: Displays the status of all Circuits
Setup: Displays the setup parameters for a Circuit
Setup: Displays the setup parameters for a Circuit
Status: Displays the status for a Circuit
Main
Menu
Fig. 1.2 Navigation
EN-RaychemNGC30UIT2Programming-AR-H58186 02/16
Events: Displays the chronological history of
all events and alarms
Network: Displays the summariazation of the
device addresses and resources
System: Displays system wide (global) set-up
parameters for all Circuits
Main Menu's Sub-Menu
(changes with each main menu selected)
Navigational
Header
10 / 84
Hide quick links:
Advertisement
Table of Contents
