Table of Contents
Advertisement
1.2 VitaL inFormation
industrial heat tracing solutions
1.1.6 CommuniCations
The NGC-UIT2 units can be networked to a host PC running Windows ® -based Raychem
Supervisor client-server software for central programming, status review, and alarm
annunciation. NGC-UIT2s support the Modbus
or 10/100Base-T Ethernet communication interface.
1.1.7 ComPLete system
The Raychem NGC-30 is supplied as a complete system ready for field connections of power
wiring and temperature sensor input. Optional Power Distribution further enhances the reduction
of field wiring and labor to install.
1.1.8 the raychem nGC-uit2-eX ProGramminG Guide
This Raychem NGC-UIT2-EX Programming Guide (H58186) assists in the set up and operation of
the Raychem NGC-20 and NGC-30 system.
The Raychem NGC-UIT software (version 4.x and higher), installed in the NGC-UIT2-EX (User
Interface Terminal), is designed to configure various Raychem devices.
This software version supports the:
1) Raychem NGC-20 controllers
2) Raychem NGC-30 Heating-Tracing Panels using:
a) NGC-30-CRM/-CRMS card rack modules with or without multiplexed RTD inputs via the
Raychem RMM2 module or RTD inputs via the Raychem PLI module.
b) MONI-RMC and RMM-DI modules for digital input and relay output signals.
It supports the RMC modules and RMM-DI for digital inputs and outputs as well.
The software provides several features to help configure and maintain the Raychem devices. This
document is not intended to provide detailed explanations of the specific features of each product,
but rather to show how to access various parameters within the devices using the Raychem NGC-
30 software. Please refer to specific detailed product use documentation:
• Raychem NGC-30 Installation Manual (H57878)
• Raychem NGC-UIT2 Modbus Protocol Interface Mapping for NGC-30 Systems (H57880).
1.1.9 user interFaCe terminaL (nGC-uit2) LanGuaGes
The languages supported by the NGC-UIT2 display are - and not limited to -: English, Spanish,
French, German, Russian, Chinese, Italian and Czech. The display language is selected by
accessing the System|Misc. screen. Refer to section 3.3.31 System | Misc Window on page 60 for
additional information.
This manual is a guide for the setup and operation of the Raychem NGC-30 and NGC-20 in
combination with the NGC-UIT2-EX user interface.
Important: All information, including illustrations, is believed to be reliable. Users, however,
should independently evaluate the suitability of each product for their particular application.
Pentair Industrial Heat Tracing Solutions makes no warranties as to the accuracy or completeness
of the information, and disclaims any liability regarding its use.
Pentair Industrial Heat Tracing Solutions only obligations are those in the Pentair Industrial Heat
Tracing Solutions Standard Terms and Conditions of Sale for this product, and in no case will
Pentair Industrial Heat Tracing Solutions or its distributors be liable for any incidental, indirect, or
consequential damages arising from the sale, resale, use, or misuse of the product. Specifications
are subject to change without notice. In addition, Pentair Industrial Heat Tracing Solutions
reserves the right to make changes—without notification to Buyer—to processing or materials
that do not affect compliance with any applicable specification.
EN-RaychemNGC30UIT2Programming-AR-H58186 02/16
®
protocol and are available with an RS-232, RS-485
6 / 84
Hide quick links:
Advertisement
Table of Contents
