Si20-701_B
optional
NO
accessory (∗2)
connected?
the power
for the optional
accessory supplied
from between 1 and 2
on terminal block
on the outdoor
unit PCB blinking?
Turn OFF the power
supply and disconnect the
connector of the outdoor
unit fan motor. Then turn
the power ON again.
on the outdoor
unit PCB blinking?
Note:
∗1 ON for 0.2 second and OFF for 0.2 second (Blink
about 25 times for 10 seconds)
(Normally, ON for 0.4 second and OFF for 0.4 second
(Blink about 12 times for 10 seconds))
∗2 Optional accessories refer to adaptor for wiring, auto
grill and other accessories.
402
A
Is any
YES
Is
X2M?
YES
Is HAP
NO
Is HAP
(∗1)
NO
C
Troubleshooting by Remote Controller
NO
YES
YES
Wire correctly.
B
Replace the
outdoor unit fan
motor.