Table of Contents
Advertisement
Applying a Privilege Level to a Username
To set the user privilege level, use the following command.
•
Configure a privilege level for a user.
CONFIGURATION mode
username username privilege level
Applying a Privilege Level to a Terminal Line
To set a privilege level for a terminal line, use the following command.
•
Configure a privilege level for a user.
CONFIGURATION mode
username username privilege level
NOTE:
When you assign a privilege level between 2 and 15, access to the system begins at EXEC mode,
but the prompt is hostname#, rather than hostname>.
Configuring Logging
The Dell Networking OS tracks changes in the system using event and error messages.
By default, Dell Networking OS logs these messages on:
•
the internal buffer
•
console and terminal lines
•
any configured syslog servers
To disable logging, use the following commands.
•
Disable all logging except on the console.
CONFIGURATION mode
no logging on
•
Disable logging to the logging buffer.
CONFIGURATION mode
no logging buffer
•
Disable logging to terminal lines.
CONFIGURATION mode
no logging monitor
•
Disable console logging.
CONFIGURATION mode
Management
73
Advertisement
Table of Contents
Troubleshooting
