About This Guide; Audience; Conventions - Dell S4048T Configuration Manual

This guide describes the protocols and features the Dell Networking Operating System (OS) supports and
provides configuration instructions and examples for implementing them. For complete information about all
the CLI commands, see the Dell Command Line Reference Guide for your system.
The S4048–ON platform is available with Dell Networking OS version 9.7.(0.1) and beyond.S4048–ON
stacking is supported with Dell Networking OS version 9.7(0.1) and beyond.
Though this guide contains information about protocols, it is not intended to be a complete reference. This
guide is a reference for configuring protocols on Dell Networking systems. For complete information about
protocols, see the related documentation, including Internet Engineering Task Force (IETF) requests for
comments (RFCs). The instructions in this guide cite relevant RFCs. The
contains a complete list of the supported RFCs and management information base files (MIBs).
Topics:
•

Audience

•

Conventions

• Related Documents
Audience
This document is intended for system administrators who are responsible for configuring and maintaining
networks and assumes knowledge in Layer 2 (L2) and Layer 3 (L3) networking technologies.
Conventions
This guide uses the following conventions to describe command syntax.
Keywords are in Courier (a monospaced font) and must be entered in the CLI as listed.
Keyword
parameter Parameters are in italics and require a number or word to be entered in the CLI.
{X} Keywords and parameters within braces must be entered in the CLI.
[X] Keywords and parameters within brackets are optional.
x|y Keywords and parameters separated by a bar require you to choose one option.
x||y Keywords and parameters separated by a double bar allows you to choose any or all of
the options.

About this Guide

Standards Compliance
About this Guide
1
chapter
37