Obtaining Help; Entering And Editing Commands - Dell S4048T Configuration Manual

interface TenGigabitEthernet 2/17
ip address 192.168.10.1/24
no shutdown
Dell(conf-if-te-2/17)#no ip address
Dell(conf-if-te-2/17)#show config
!
interface TenGigabitEthernet 2/17
no ip address
no shutdown
Layer 2 protocols are disabled by default. To enable Layer 2 protocols, use the no disable command. For
example, in PROTOCOL SPANNING TREE mode, enter no disable to enable Spanning Tree.

Obtaining Help

Obtain a list of keywords and a brief functional description of those keywords at any CLI mode using the ? or
help command:
• To list the keywords available in the current mode, enter ? at the prompt or after a keyword.
• Enter ? after a command prompt to list all of the available keywords. The output of this command is the
same as the help command.
Dell#?
bmp
cd
clear
clock
• Enter ? after a partial keyword lists all of the keywords that begin with the specified letters.
Dell(conf)#cl?
class-map
clock
Dell(conf)#cl
• Enter [space]? after a keyword lists all of the keywords that can follow the specified keyword.
Dell(conf)#clock ?
summer-time
timezone
Dell(conf)#clock

Entering and Editing Commands

Notes for entering commands.
• The CLI is not case-sensitive.
• You can enter partial CLI keywords.
• Enter the minimum number of letters to uniquely identify a command. For example, you cannot
enter cl as a partial keyword because both the clock and class-map commands begin with the
letters "cl." You can enter clo, however, as a partial keyword because only one command begins
with those three letters.
• The TAB key auto-completes keywords in commands. Enter the minimum number of letters to uniquely
identify a command.
• The UP and DOWN arrow keys display previously entered commands (refer to
BMP commands
Change current directory
Reset functions
Manage the system clock
Configure summer (daylight savings) time
Configure time zone
Command History).
Configuration Fundamentals 46