Obtaining Help - Dell S6100 Configuration Manual

% Warning: The following users are currently configuring the system:
User "" on line console0
User "admin" on line vty0 ( 123.12.1.123 )
User "admin" on line vty1 ( 123.12.1.123 )
User "Irene" on line vty3 ( 123.12.1.321 )
Dell#conf
When another user enters CONFIGURATION mode, Dell Networking OS sends a message similar to the following:
% Warning: User "admin" on line vty2 "172.16.1.210" is in configuration
In this case, the user is "admin" on vty2.

Obtaining Help

As soon as you are in a Command mode, there are several ways to access help:
To obtain a list of Type a ? at the prompt or after a keyword. There must always be a space before the ?.
keywords at any
command mode:
To obtain a list of Type help at the prompt.
keywords with a
brief functional
description:
To obtain a list of Type a keyword, and then enter a space and a ?.
available options:
To obtain a list of Type a partial keyword, and then enter a ?.
partial keywords
using a partial
keyword:
Example
The following is an example of entering ip ? at the prompt:
Dell(conf)#ip ?
access-list
as-path
community-list
control-plane
dhcp
domain-list
domain-lookup
domain-name
ecmp
ecmp-group
extcommunity-list
ftp
helper-address
host
http
icmp
igmp
max-frag-count
mroute
msdp
multicast-limit
multicast-msdp
multicast-routing
name-server
pim
prefix-list
radius
redirect-list
route
route-export
route-import
scp
source-route
ssh
tacacs
Named access-list
BGP autonomous system path filter
Add a community list entry
Control plane configuration
DHCP configuration commands
Domain name to complete unqualified host name
Enable IP Domain Name System hostname translation
Define the default domain name
Weighted Ecmp Configuration
ECMP Group Configuration
Add a Extended community list entry
FTP configuration commands
DHCP relay agent configuration
Add an entry to the ip hostname table
HTTP configuration commands
ICMP configuration commands
Internet Group Management Protocol
Max. fragmented packets allowed in IP re-assembly
Multicast routes and counters
Multicast source discovery protocol
Max entries in Multicast TIB
Enable IP multicast MSDP protocol
Enable IP multicast forwarding
Specify addess of name server to use
Protocol Independent Multicast
Build a prefix list
Interface configuration for RADIUS
Named redirect-list
Establish static routes
Export routes
Import routes
SCP configuration commands
Process packets with source routing header options
SSH configuration commands
Interface configuration for TACACS+
CLI Basics 43