Table of Contents
Advertisement
This document is intended as an installation guide to get new systems up and running and ready for configuration.
You can use a Dell N20xx or N30xx either as a switch or a port extender for a C9010 switch. You can use the N20xx or N30xx series
devices as a switch if you use the Dell Networking OS version 6.3(0.16) or later. If you use a N20xx or N30xx series device as a port
extender for the C9010, install the Dell Networking OS version 9.11(0.0) or later. For converting the switch, purchase a rapid access node
conversion license from Dell. For more information about installing the Dell Networking OS version 9.11(0.0) or version 6.3(0.16) on an
N20xx or N30xx system, see the Dell Networking OS Conversion Guide for the N20xx/N30xx Series.
For complete installation, configuration, and update information, see the following documents at www.dell.com/support.
Table 1. N20xx/N30xx Documentation
Information
Software configuration
Command-line interface
Installing Dell Networking OS version 9.11(0.0) or version 6.3(0.16)
on an N20xx or N30xx system
Latest updates
All manuals and user guides at all-guides.com
Documentation
•
•
•
•
Dell Networking OS Conversion Guide for the N20xx/N30xx Series
Dell Networking C9010, C1048P, and N20xx/N30xx Series Release
Notes
About this Guide
Dell Networking Configuration Guide for the C9000 Series—for
Dell Networking OS 9.11(0.0) or later
Dell Networking N-Series User Guide—for Dell Networking OS
6.3(0.16)
Dell Networking Command-Line Reference Guide for the
C9000 Series—for Dell Networking OS 9.11(0.0) or later
Dell Networking CLI Reference Guide—for Dell Networking OS
6.3(0.16)
1
About this Guide
3
Advertisement
Table of Contents
