Removing Panel; Installing Panel; Guide Tabs - Jeep RENEGADE 2017 Owner's Manual

Hide thumbs Also See for RENEGADE 2017:

Table of Contents

8. Remove the panel from the outside of the vehicle.

Removing Panel

9. Place the panel inside of the provided bag for storage in

the cargo area. Repeat the process for the rear panel.

NOTE: An air deflector is available on the Jeep accessory

line. This deflector may be used to avoid the "wind

buffeting" inside the vehicle, if the front panel is removed.

NOTE: Rear panel must be installed before the front panel.

1. From outside the vehicle, place the panel on the slides.

GETTING TO KNOW YOUR VEHICLE 91

2. Gently slide the front panel forward, or the rear panel

3. Align the colored guide tabs to ensure the panel(s) close

properly. Front panel is labeled with yellow guide tabs.

Rear panel is labeled with blue guide tabs.