Table of Contents
Advertisement
466 MULTIMEDIA
Setting Name
Rear ParkSense Volume —
If Equipped
Front ParkSense Volume
— If Equipped
Blind Spot Alert — If
Equipped
NOTE:
• When this feature is selected, the Blind Spot Alert feature can be set to Off, Lights or Lights and Chime. The Blind
Spot Alert feature can be activated in Lights mode. When this mode is selected, the Blind Spot Monitor (BSM) sys-
tem is activated and will only show a visual alert in the outside mirrors. When Lights & Chime mode is activated,
the Blind Spot Monitor (BSM) will show a visual alert in the outside mirrors as well as an audible alert when the
turn signal is on. When Off is selected, the Blind Spot Monitor (BSM) system is deactivated.
• If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not dam-
aged, the sensor may have become misaligned. Take your vehicle to an authorized dealer to verify sensor align-
ment. A sensor that is misaligned will result in the BSM not operating to specification.
ParkView Backup Camera
Active Guidelines — If
Equipped
NOTE: ParkView Backup Camera Active Guidelines — If Equipped Your vehicle may be equipped with the ParkView Rear
Back Up Camera Active Guidelines that allows you to see active guidelines over the ParkView Back up camera display
whenever the gear selector is put into REVERSE. The image will be displayed on the radio touchscreen display along with a
caution note to "check entire surroundings" across the top of the screen. After five seconds, this note will disappear.
Selectable Options
Low
Medium
Low
Medium
Off
Lights
On
High
High
Lights & Chime
Off
Advertisement
Table of Contents
