Rear Tail Lamp Holder; Center High Mounted Stop Lamp (Chmsl); License Plate Light Location - Jeep RENEGADE 2017 Owner's Manual

Hide thumbs Also See for RENEGADE 2017:

Table of Contents

332 IN CASE OF EMERGENCY

7. Replace the bulb as necessary.

Rear Tail Lamp Holder

1 — Tail Light

2 — Reverse Bulb

3 — Position Light/Stop Light/Turn Signal

8. Insert the new bulb, making sure it is properly locked.

9. Reassemble the lamp assembly on the rear tail lamp

housing, tightening the screws.

10. Reposition the rear tail lamp on the car.

11. Secure the fastener of the rear tail lamp and reconnect

the electrical connector.

12. Reinstall the door making sure of its correct locked.

13. Finally close the tailgate.

The CHMSL is LED. For replacement see your authorized

License Plate Lights

To replace the bulbs proceed as follows:

1. Using a suitable tool remove the license plate lens.