Locking Tab; Support Rod And Seat; To Close The Hood - Jeep RENEGADE 2017 Owner's Manual

Hide thumbs Also See for RENEGADE 2017:

Table of Contents

98 GETTING TO KNOW YOUR VEHICLE

Remove the support rod from the locking tab and insert it

into the seat located on the underside of the hood. Be sure

the rod is locked into position.

Locking Tab

1 — Support Rod

2 — Support Rod Seat

Hold up the hood with one hand, and with the other hand,

remove the support rod from its seat and reinsert it into the

locking tab.

Lower the hood to approximately 12 inches (30 cm) from

the engine compartment and drop. Make sure that the

hood is completely closed.