Hazard Warning Flashers; Driver Assistance Call Buttons; Assist And 9-1-1 - If Equipped - Jeep RENEGADE 2017 Owner's Manual

Hide thumbs Also See for RENEGADE 2017:
Table of Contents

Advertisement

HAZARD WARNING FLASHERS

The Hazard Warning flasher switch is located on the switch
bank below the radio.
Push the switch to turn on the Hazard Warning
Flasher. When the switch is activated, all directional
turn signals will flash on and off to warn oncoming traffic
of an emergency. Push the switch a second time to turn off
the Hazard Warning flashers.
This is an emergency warning system and it should not be
used when the vehicle is in motion. Use it when your
vehicle is disabled and it is creating a safety hazard for
other motorists.
When you must leave the vehicle to seek assistance, the
Hazard Warning flashers will continue to operate even
though the ignition is placed in OFF mode.
NOTE: With extended use the Hazard Warning flashers
may wear down your battery.
ASSIST AND 9-1-1 — IF EQUIPPED
If equipped, the overhead console contains an ASSIST and
a 9-1-1 button.

Driver Assistance Call Buttons

1 — 9-1-1 Button
2 — Assist Button
WARNING!
ALWAYS obey traffic laws and pay attention to the
road. Some Uconnect Access services, including 9-1-1
and Assist, will NOT work without an operable
1X(voice/data) or 3G(data) network connection.
IN CASE OF EMERGENCY 313
7

Advertisement

Table of Contents
loading

Table of Contents