Position Light/Daytime Running Light Assembly
1 — DRL Bulb Socket
2 — Turn Signal Bulb Socket
5. To replace the bulb gently push bulb and rotate coun-
terclockwise.
Bulb and Socket Assembly
1 — Bulb
2 — Rotate Bulb
6. Insert the new bulb by pushing on it and turning it
clockwise. Make sure the bulb is correctly locked in
place.
7. Install the bulb and sockets and rotate them clockwise
(right side) and clockwise (left side), making sure that it
is properly locked.
8. Reconnect the electrical connectors.
IN CASE OF EMERGENCY 323
7