Table of Contents
Advertisement
146 GETTING TO KNOW YOUR INSTRUMENT PANEL
Electronic Stability Control (ESC) Indicator Light
Yellow Telltale
Light
Electronic Stability Control (ESC) Indicator Light — If Equipped
The "ESC Indicator Light" in the instrument cluster will come on when the ignition is placed in
the ON/RUN position. It should go out when the engine is running. If the "ESC Indicator Light"
comes on continuously with the engine running, a malfunction has been detected in the ESC sys-
tem. If this light remains on after several ignition cycles, and the vehicle has been driven several
miles (kilometers) at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon
as possible to have the problem diagnosed and corrected.
• The "ESC Off Indicator Light" and the "ESC Indicator Light" come on momentarily each
time the ignition switch is placed in the ON/RUN position.
• Each time the ignition is placed in the ON/RUN position, the ESC system will be ON, even
if it was turned off previously.
• The ESC system will make buzzing or clicking sounds when it is active. This is normal; the
sounds will stop when ESC becomes inactive following the maneuver that caused the ESC
activation.
NOTE: This telltale indicates that an ESC event is active.
What It Means
Advertisement
Table of Contents
