Automatic Temperature Control (Atc)-If Equipped; Automatic Operation - Jeep RENEGADE 2017 Owner's Manual

Hide thumbs Also See for RENEGADE 2017:
Table of Contents

Advertisement

NOTE: The Climate Control unit stores the temperatures
set before the system was turned off and restores them
when one of the following knobs/buttons is pushed:
• A/C
• Recirculation
• Max Defrost
• Blower Increase
• AUTO
To restart the Climate Control system in fully automatic
mode, push the AUTO button.
System Maintenance
In Winter, the Climate Control system must be turned on at
least once a month for approximately 10 minutes.
Have the system inspected at an authorized dealership
before the summer.
NOTE: The system uses R-1234yf (refrigerant) which does
not pollute the environment in the event of accidental
leakage. Under no circumstances is the use of R-134a
(refrigerant) allowed.
GETTING TO KNOW YOUR VEHICLE 79
Automatic Temperature Control (ATC) — If
Equipped

Automatic Operation

1. Push the AUTO button on the front ATC panel and the
word "AUTO" will illuminate in the front ATC display,
along with two temperatures for the driver and front
passenger. The system will then automatically regulate
the amount of airflow.
2. Adjust the temperature you would like the system to
maintain, by adjusting the driver, and passenger tem-
peratures. Once the desired temperature is displayed,
the system will achieve and automatically maintain that
comfort level.
3. When the system is set up for your comfort level, it is
not necessary to change the settings. You will experience
the greatest efficiency by simply allowing the system to
function automatically.
3

Advertisement

Table of Contents
loading

Table of Contents