Dome Light Vanity Mirror
To replace the bulbs proceed as follows:
1. Lift the cover of the mirror and pull out the visor mirror
light cover.
2. Replace the bulb, releasing it from the side contacts, and
then insert the new bulb, making sure that it is properly
locked between the contacts.
1 — Visor Mirror Cover
2 — Visor Mirror Light
Visor
3. Reinstall the visor mirror light cover making sure that it
is properly locked.
4. Finally lower the visor mirror cover to the mirror.
Dome Light Glove Compartment
To replace the bulb proceed as follows:
1. Open the glove compartment;
2. Place your fingers inside the light assembly, pull the
bulb to replace it.
Bulb Removal/Installation
IN CASE OF EMERGENCY 335
7